|
 |
|
|
The UCAG uses nothing but compressed-air and uses neither electric power
nor chlorofluorocarbon(CFC) which is one of the factors of environmental
destruction. Just connect the UCAG to the compressed-air line to obtain
the air at -50 (in case using compressed-air at +20 with 0.7Mpa(7kg/ ) on the UCAG model 190-75SV).
Ultra-cold air is most typically applied to the removal of heat generated
in the process of machining, cutting metals and plastics. The UCAG performs
excellently particularly on the materials with hardness and viscosity such
as titanium alloy, stainless steel, super-alloy, thermo-plastics etc.
Cooling effect on the work piece and tool increases machining speed and extends tool life.
The UCAG has been utilized, producing remarkable results, for a variety
of spot cooling such as cooling electrical and instrumental enclosures
to prevent troubles caused by heat, mold tools, semiconductors and PC base
for test and further, dry machining of magnesium alloys.
|
|
|
|
|
|
|
